Home -----  Northern Machine Tools---- Online Auctions  ----  Contact Us

FOR SALE BY PRIVATE TREATY

1/ Noble & Lund 30” Straight Bed Lathe, Serial No 2747D/7822J, swing over bed 1625mm, swing over cross slide 1220mm, maximum distance between centres 7620mm, complete with 60” 4 jaw chuck, spindle speeds 1 – 59.5rpm, feeds sliding coarse 4 – 20 cuts per inch, fine 36 – 180 cuts per inch, surfacing coarse 8 – 40 cuts per inch, fine 72 – 360 cuts per inch, power feed to compound slide, rapid power traverse.

3/ SOLD Broadbent Gap Bed Lathe, swing over bed 1220mm, swing over saddle 1066mm, swing in gap 1825 x 610mm, max distance between centres 9144mm. Spindle speeds 4.5 – 500rpm, complete with twin saddles, linishing unit, 42” 4 jaw chuck. 

4/ SOLD Mitchell Gap Bed Centre Lathe, swing over bed 610mm, swing over saddle 355mm, max distance between centres 3962mm.                     

5/ Noble & Lund Head stock Serial No 4907F, spindle speeds 0.7 – 41 rpm, complete with 2438mm 4 jaw chuck and tail stock                      

6/ SOLD Stirk Double Column Plano Milling Machine, table 6700 x 1524mm, maximum distance between the columns 1854mm, maximum height under the cross rail 1981mm, complete with Hydrquip vertical milling head, 2No column mounted planning boxes.

7/ Richards PRT3N Table Type Horizontal Borer, spindle diameter 90mm, spindle taper 5MT, facing head diameter 710mm, main table 1524 x 915mm                  

8/ Collet & Englehardt Floor Borer                                                 

9/ Froriep Single Column Elevating Rail Ram Type Vertical Borer, Model KE12 Super, Serial No 95135, table diameter 1250mm, max swing 1450mm, max height under cross rail 1600mm, ram traverse 900mm, maximum table load 6000kg, table speeds 4.2 – 210rpm, feeds 0.002 – 0.177 inch per rev, rapids 2000mm/min, complete with 4 jaw chuck, 4 table jaws, pendent control, approximate dimensions 2800 x 2800 x 3800mm.                                                             

10/ Niles Powered Rotary Table, table diameter 6000mm, max table load 50 ton, variable speed control forward and reverse.                                                                       

11/ 3050mm Powered Rotary Table                                                            

12/ SOLD 2745mm Diameter Powered Rotary Table                                                        

13/ Asquith 1525 x 1525mm powered rotary table with 1220mm powered traverse.   

15/ Muir Model No 228 Spur And Helical Gear Hobber, Machine Extended To 9144mm Capacity In Early 1970’s,  Max work piece diameter 9144mm, Max face width 2133mm, Table diameter 2743mm, Hob feeds (6) 0.048ins-0.116ins, Hob speeds variable DC Drive, Max Hob size 10”dia x 9”long, Hob shift manual, Main motor x 2 15 HP Each, Electrics 400/440v, -3 phase, 50 cycles, complete with Power rotary table, Spiralling ratio, Prime gears, Compensation gear, Hob arbour, Power to hob Swivel, Change gears, Coolant, Imperial machine, approximate dimensions 12,200mm x 4267mm x 5500mm    

16/ SOLD Craven Horizontal Gear/Spline Hobber, Serial No 16298, Max rated work dia 1016 mm, Max travel of hob carriage 1435 mm, Max distance from work spindle face to tail centre 3048 mm, Max hob diameter 152 mm, Max swivel angle setting 30° Left or Right, Max hob speed (6) 10 - 29 rpm, Hob Feeds (37) 0.015”- 0.240”, Main drive motor 10 HP @ 960 rpm, Electrics 400/440v, 3 phase, 50 cycles, approximate weight 16000 kgs, approximate dimensions 8000mm x  4000mm x 2500mm High, Complete With, Sprialling ratio, Dividing gears, Prime gears, Rapid traverse, Manual hob shift, Hob arbor & support, Large assortment of change gears, Automatic lubrication, Swarf Auger, Coolant, Push button controls.

17/ Klingelnberg Hob Sharpener 12” diameter x 12” long                     

18/ Hugh Smith 6000mm Pyramid Plate Bending Rolls complete with drop end, Serial No C22647, capacity 6000 x 40mm, 3000 x 150mm top roll diameter 875mm, main drive motor 130hp, approximate dimensions 15000 x 4500 x 4000mm                                                                            

19/ 2600 x 37mm Pyramid Plate Bending Rolls, top roll diameter 280mm, complete with hydraulic top roll extractor, approximate dimensions 6000 x 1500 x 3600mm.                                                                           

20/ 3200 x 37mm Pyramid Plate Bending Rolls, complete with hydraulic top roll, extractor and bottom support rolls, approximate dimensions 7300 x 2600 x 3400mm.                                                   

21/ 3900 x 75mm Pyramid Plate Bending Rolls, complete with hydraulic top roll extractor and bottom support roll. Top roll diameter 710mm & 533mm, approximate dimensions 17000 x 3200 x 5400mm.

22/ Steco Powered Pyramid Plate Bending Rolls, capacity 6 x ½” top roll diameter 7 ½” Serial No B15646.                                                                                          

23/ 300 ton 8’ x 1” Upsetter, approximate dimensions 2900 x 1600 x 3200mm.                                                               

24/ 1250 ton x 12’ Upsetter, approximate dimensions 4500 x 2000 x 4000mm.                                                                            

25/ Horizontal Hydraulic Wheel Press, maximum component diameter 1320mm, max pressure 350 ton, maximum distance between bolster and ram face 2650mm, centre height 508mm.

26/ Plate Heating Furnace 4000mm wide.                                       

27/ Faun 20 ton mobile telescopic crane                                          

28/ Seddon 20’ flat back lorry.                                                                          

29/ Bode TRC 9 x 18.5 Column & Boom, Serial No M26856, vertical traverse 1600mm, long traverse 6000mm, complete with Murex FCRA 800amp power source.

30/ SOLDLincoln Column & Boom Model RC14 x 14, Serial No M24074, horizontal traverse 7500mm, vertical traverse 3200mm, complete with Esab LAD1100 power source, serial No 721-947-6025.

31/ Lincoln Column & Boom Model RC 14 x 14, horizontal traverse 7500mm, vertical traverse 3200mm, complete with BOC 900amp power source.         

32/ SOLDLincoln Column & Boom type RD16 x 16, vertical traverse 4500mm, horizontal traverse 4500mm                                                                                  .          

33/ Lincoln Column & Boom horizontal traverse 3600mm, vertical traverse 5000mm.                                                                                                   

34/ SOLD Bode SAR 500 self aligning rotators, driver and idler, Serial No M27269.                                                                                            

35/ Bode conventional rotator Driven & Idler, capacity 50 ton.         

36/ SOLD Bode SAR500 self aligning rotator, Driven & Idler                    

37/ Bode conventional rotator Driven & Idler, approx 50 ton capacity.                   

38/ Self Aligning rotators 1No Driven with 2No idlers                                              

39/ 2No WPE conventional rotator, type CR1101, Idlers                                         

40/ 2No steel wheeled conventional rotators.                                       

41/ 2 No floor plates 7775 x 1370mm each.